Exploring Building Nymph Part 8
Exploring Building Nymph Part 8 reveals several interesting facts.
- Adding the outside wooden rails to the hull.
- Adding the bow and transom panels, and more on using bolts, washers, and nuts to hold the panel edges in alignment.
- The 8th episode of RIO's "How To" series, is presented by RIO ambassador Russ Miller. Here he explains the difference between ...
- Wiring the side panels to the bottom panel, and drilling for the 1/4" bolts that hold the edges inline.
- Laying out the curved lines for the hull side panels.
In-Depth Information on Building Nymph Part 8
Checking that the hull is level and square. Using cords at the corners, beam, and stern to bow top corners to hold the hull square. This is the first Using 2" and 3" tape on the interior seams. Cleaning up the faired edges, applying the "cut edge masking tape", and laying out and smoothing the 6oz glass cloth.
Cutting out the side panels and doing the edge bevels and marking for the wire holes and the edges of the 2" and 3" glass tapes.
Stay tuned for more updates related to Building Nymph Part 8.
