Exploring Panorama Electrical Elevator Microcontroller Interfacing Circuit Part 3
Exploring Panorama Electrical Elevator Microcontroller Interfacing Circuit Part 3 reveals several interesting facts.
- Controlling the position of the car depends on controlling the main motor by changing its direction and turning it on and off when ...
- Shaft contains rectangular plate made of stainless steel called (doors plate) was fixed by bolts on two columns on the doors side ...
- Shaft is the space where the car moves up and down. In this project, it contains two rectangular steel plates as basement and roof, ...
- Door drive system was tested and controlled firstly by connecting the door motor to the power supply directly. Then, drive
- When the car stops at a floor, car door and landing door must open together. On the car, motor will open the car door, so, there ...
In-Depth Information on Panorama Electrical Elevator Microcontroller Interfacing Circuit Part 3
The same PIC programmed to connect another two input ports and two output ports to control the car door. The two input ports ... Micro- After testing the The goal of the project was to build
Counter weight is a very essential
Stay tuned for more updates related to Panorama Electrical Elevator Microcontroller Interfacing Circuit Part 3.
